Tuesday 19 May 2009

FREE ENERGY SAVING DEVICE

Bookmark and Share












FREE energy saving device

It virtually amounts to FREE ENERGY if you install a LITTLE PLUMBER water conditioner.

“Why” you ask?

If you live in a hard water area then you will undoubtedly be aware of the crusty formation of limescale around your taps and in your kettle.

What you can’t see is the layer upon layer of scale that has deposited on the heat exchangers in you boiler or hot water cylinder. These deposits can cause you huge energy loss because the heat generated simply cannot escape the heating elements to heat up the water. The limescale effectively acts as an insulator and stops generated heat from heating the water and this can cost a huge amount in extra wasted energy. Most domestic boilers in hard water areas will lose around £120 to £200 worth of energy in a year. The bigger the property, the more energy will be wasted.

Add to this the additional cost of replacing appliances like Dishwashers, Washing Machines plus the cost of corrosive chemicals to try and prevent limescale forming. Plus of course the additional cost of softeners salt and soaps to try and cope with all the problems of hard water and you can see that the total amount of money you waste each year is pretty substantial.

Enter the Little Plumber, which starts at under £100.00 and is absolutely GUARANTEED to remove and prevent limescale. In fact it is so good that Splendid Products Ltd who make the unit in Oxford will actually give you your money back if for “any reason” you are not completely satisfied with its performance.

So, by fitting a Little Plumber unit you will actually save more in a year than the unit costs you. You don’t have to be Einstein to work out that the saving is more than the cost so therefore the unit is virtually free. And if the saving in energy bills is greater than the cost of the unit then you are probably looking at a device that is not only FREE but will actually save you even more than it costs to start with.

Oh, and don’t forget…..it’s made in ENGLAND!!
Bookmark and Share

Friday 8 May 2009

Limescale prevented at Grimaldi House

Bookmark and Share
Grimaldi Agencies have their UK Headquarters at Grimaldi House in St James Square in London.

They have installed a 150-litre tank, non-ventilated hot water cylinder running at 4.5 bars of pressure to heat all the water in the entire premises. The water is heated by two electric immersion heaters and it is on 24 hours a day. All might have been well if St James Square was in a soft water area but the water supply is unfortunately very hard.

The hard water caused such limescale precipitation on the immersion heaters that they had to be changed every week as they became very quickly encrusted with thick scale. This layer of scale not only increased the overall usage of electricity as the scale was preventing the heat transferring into the water but also caused the elements to fail regularly.

Banyards Ltd of Brune Street in London who are responsible for the maintenance of the hot water systems in Grimaldi House asked Splendid Products Ltd to advise on a simple method way of solving the problem which was in fact becoming something of a costly nightmare.

Splendid supplied an LP4 electronic water conditioner which was fitted by Banyards and now over three months has elapsed with no problems at all. A huge saving in terms of downtime and energy.

The LP4 costs around £3.00 a year to run and requires no maintenance once fitted. It is therefore not surprising that other facility managers are very interested in this cheap and very effective method of solving the expensive and time consuming problem of Limescale.

The LP units are all made in Oxford in the U.K. by Splendid products Limited